Difference between revisions of "Mini210S"

From ARMWorks
Jump to: navigation, search
(Debian on SD)
(CON6 (GPIO): Added GPIO labels)
 
(17 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
==Overview==
 
==Overview==
Mini210S Single Board Computer,ARM Cortex-A CPU Samsung S5PV210 at 1GHz. Mini210S RAM: 512M DDR2, Flash: 1GB SLC NAND PowerVR SGX540  Mini210S,TFT LCD,Android 4.x, Linux/Debian/Ubuntu, WindowsCE 6.0, uCosII,IoT,smart home,HMI,industrial control,
 
  
==On Board I/O==
+
[[File:Mini210s_-_Board_Layout_-_001.jpg|thumb|right|480px|Mini210s Board Layout]]
Show all connectors and signals.
+
===System===
 +
* CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine (smooth 2D/3D, up to 1080p @ 30 fps decoding and encoding)
 +
* RAM: 512 MB DDR2 RAM, 32-bit bus
 +
* Flash: 1GB SLC NAND Flash
 +
* EEPROM: 256 Byte (I2C)
 +
* Ext. Memory: MicroSD card slot, Custom SDIO adapters.
 +
* RTC: Real-Time Clock with battery
 +
 
 +
===Video & Audio===
 +
* LCD Interface: 41-pin (1.0 mm) connector for FriendlyARM Displays, resistive and capacitive.
 +
* Monitor: Mini-HDMI (type C)
 +
* Camera: 20-pin (2.0 mm) CMOS Camera interface
 +
* Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)
 +
* Audio Input: Condenser microphone on board
 +
 
 +
===Network===
 +
* Ethernet: RJ45 10/100M (DM9000)
 +
 
 +
===Other IO===
 +
* Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
 +
* USB: 1x USB-A Host 2.0, 1x Mini-USB Slave/OTG 2.0
 +
* Beeper: PWM buzzer
 +
* User Inputs: 4x push buttons and 1x ADC pot
 +
* User Output LEDs: 4x
 +
* Mobile Industry Processor Interface (MIPI): 24-pin (2.0 mm) header
 +
* SDIO Interface: 20-pin (2.0 mm) header, supports SD WiFi module, contains 1x SPI and 2x I2C
 +
* 8×8 Keypad Interface: 20-pin (2.0 mm) header
 +
* GPIO Interface: 10-pin (2.0 mm) header, contains ADC, I2C, I2C, SPI, PWM, IO...
 +
* Debug: 10-pin JTAG (2.0 mm)
 +
 
 +
===Mechanical===
 +
* Dimensions: 110 × 110 mm
 +
* Temperature: 0°C to 70°C
 +
* Power: Regulated 5V (DC-Plug)
 +
* Weight: 98g
 +
 
 +
===Hardware configuration:===
 +
* CPU processor - SOC (System On Chip)
 +
* Samsung S5PV210, based on the ARM Cortex ™-A8, running at 1GHz
 +
* High-performance graphics engine built-in. PowerVR SGX540
 +
* 2D/3D graphics acceleration for supper smooth real-time graphics.
 +
* Supports up to 1080p @ 30fps hardware decoding and smooth video playback, using MPEG4, H.263, H.264.
 +
* Supports up to 1080p @ 30fps hardware encoding (Mpeg-2/VC1,) video input.
 +
 
 +
===RAM===
 +
* Size: 512MB DDR2
 +
* Full width 32 bit data bus, single-channel
 +
 
 +
===FLASH memory===
 +
* SLC NAND Flash: 1GB (Standard)
 +
* Supports SLC NAND Flash: 256M/512M/1GB (OEM optional)
 +
 
 +
===LCD display===
 +
* LCD: 41Pin, 1.0mm pitch, same as Mini2440/Mini6410 displays.
 +
* Touch pad support with one I2C and 3-way interrupts, 1 PWM output
 +
* MiniHDMI HD connector (Type C)
 +
* The LCD controller supports from 3.5 inches to 12.1 inches with screen resolution up to 1024x768.
 +
 
 +
===Network (including wireless)===
 +
* 10/100M Ethernet RJ45 interface (using DM9000AEP)
 +
 
 +
===Standard interface resources===
 +
* DB9 serial RS232 five lines (shares four pin TTL level serial COM 0)
 +
* Mini USB 2.0 Slave OTG interface   
 +
* USB through the 2.0mm interface header
 +
* 1 channel 3.5mm stereo audio output interface
 +
* On board microphone
 +
* External speaker interface (direct drive 8Ω 1W speaker)
 +
* USB Host 2.0 interface
 +
* Standard MicroSD card socket
 +
* 5V DC voltage input 
 +
 
 +
===On-board resources===
 +
* I2C-EEPROM chip (256byte), mainly used to test the I2C bus
 +
* 4 LED (green) 
 +
* 4 Push buton switches 
 +
* One Pot on ADC conversion input 0 for test.
 +
* 1 PWM buzzer.
 +
* On board battery backed real-time clock.
 +
 
 +
===External expansion interface resources===
 +
* 4 serial connectors: TTL level, 2.0mm spacing;
 +
** CON1, CON2 six-wire serial port - includes 5V and Gnd.
 +
** CON3, CON4 four-wire serial port - includes 5V and Gnd 
 +
* JTAG interface: 10pin 2.0mm pitch
 +
* LCD  interface: 41pin 1.0mm pitch Chip Block
 +
* MIPI  interface: 24pin 2.0mm pitch pin header
 +
* SDIO interface: 20pin 2.0mm pitch
 +
** Access for SD WiFi, SDIO includes SPI and I2C interfaces
 +
* CMOS camera interface: 20pin 2.0mm pitch.
 +
* 8x8 matrix keyboard interface: 20pin 2.0mm pitch
 +
* GPIO interface: 30pin, 2.0mm pitch
 +
** Additional AD input, interrupts, I2S, I2C, SPI PWM port, digital input/output
 +
 
 +
===Software Support===
 +
* [[Superboot]]
 +
* Linux-2.6.35 + Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
 +
* Android 2.3 (Linux-2.6.35 kernel)
 +
* Android 4.0 (Linux-3.0 kernel, only to provide the programming file)
 +
* [[Windows_CE_6 | WindowsCE 6.0r3]]
 +
 
 +
==Board I/O==
 +
 
 +
Board connector pin outs and information for the Mini210s board, Smart and Tiny SDK board will vary.
 +
 
 +
===CON1 (UART)===
 +
 
 +
'''Linux Device:''' /dev/ttySAC0
 +
 
 +
'''WinCE 6:''' COM0
 +
 
 +
'''Notes''': Is also connected to RS232 DB9 connector.
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| RTS
 +
|-
 +
| '''2'''
 +
| CTS
 +
|-
 +
| '''3'''
 +
| TX
 +
|-
 +
| '''4'''
 +
| RX
 +
|-
 +
| '''5'''
 +
| VDD_5V
 +
|-
 +
| '''6'''
 +
| DGND
 +
|}
 +
 
 +
 
 +
===CON2 (UART)===
 +
 
 +
'''Linux Device:''' /dev/ttySAC1
 +
 
 +
'''WinCE 6:''' COM1
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| RTS
 +
|-
 +
| '''2'''
 +
| CTS
 +
|-
 +
| '''3'''
 +
| TX
 +
|-
 +
| '''4'''
 +
| RX
 +
|-
 +
| '''5'''
 +
| VDD_5V
 +
|-
 +
| '''6'''
 +
| DGND
 +
|}
 +
 
 +
 
 +
===CON3 (UART)===
 +
 
 +
'''Linux Device:''' /dev/ttySAC2
 +
 
 +
'''WinCE 6:''' COM2
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| TX
 +
|-
 +
| '''2'''
 +
| RX
 +
|-
 +
| '''3'''
 +
| VDD_5V
 +
|-
 +
| '''4'''
 +
| DGND
 +
|}
 +
 
 +
 
 +
===CON4 (UART)===
 +
 
 +
'''Linux Device:''' /dev/ttySAC3
 +
 
 +
'''WinCE 6:''' COM3
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| TX
 +
|-
 +
| '''2'''
 +
| RX
 +
|-
 +
| '''3'''
 +
| VDD_5V
 +
|-
 +
| '''4'''
 +
| DGND
 +
|}
 +
 
 +
 
 +
 
 +
===CON6 (GPIO)===
 +
{| class="wikitable"
 +
|-
 +
! Row 1 Pin
 +
! Description
 +
! Row 2 Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| VDD_SYS_3.3V
 +
| '''2'''
 +
| DGND
 +
|-
 +
| '''3'''
 +
| XadcAIN1
 +
| '''4'''
 +
| XEINT0/GPH0_0
 +
|-
 +
| '''5'''
 +
| XadcAIN2
 +
| '''6'''
 +
| XEINT1/GPH0_1
 +
|-
 +
| '''7'''
 +
| XadcAIN6
 +
| '''8'''
 +
| XEINT2/GPH0_2
 +
|-
 +
| '''9'''
 +
| XadcAIN7
 +
| '''10'''
 +
| XEINT3/GPH0_3
 +
|-
 +
| '''11'''
 +
| XadcAIN8
 +
| '''12'''
 +
| XEINT4/GPH0_4
 +
|-
 +
| '''13'''
 +
| XadcAIN9
 +
| '''14'''
 +
| XEINT5/GPH0_5
 +
|-
 +
| '''15'''
 +
| Xi2cSDA0
 +
| '''16'''
 +
| XEINT6/GPH0_6
 +
|-
 +
| '''17'''
 +
| Xi2cSCL0
 +
| '''18'''
 +
| XEINT9/GPH1_1
 +
|-
 +
| '''19'''
 +
| Xi2cSDA1
 +
| '''20'''
 +
| XspiCLK1
 +
|-
 +
| '''21'''
 +
| Xi2cSCL1
 +
| '''22'''
 +
| PDXspiCS1
 +
|-
 +
| '''23'''
 +
| Xi2cSDA2
 +
| '''24'''
 +
| XspiMISO1
 +
|-
 +
| '''25'''
 +
| Xi2cSCL2
 +
| '''26'''
 +
| XspiMOSI1
 +
|-
 +
| '''27'''
 +
| XnRSTOUT
 +
| '''28'''
 +
| XpwmTOUT2
 +
|-
 +
| '''29'''
 +
| XPWRRGTON
 +
| '''30'''
 +
| XpwmTOUT3
 +
|-
 +
|}
 +
 
 +
===CON9 (SD WIFI)===
 +
{| class="wikitable"
 +
|-
 +
! Row 1 Pin
 +
! Description
 +
! Row 2 Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| VDD_SYS_3.3V
 +
| '''2'''
 +
| DGND
 +
|-
 +
| '''3'''
 +
| NC
 +
| '''4'''
 +
| NC
 +
|-
 +
| '''5'''
 +
| Xi2cSCL0
 +
| '''6'''
 +
| Xi2cSDA0
 +
|-
 +
| '''7'''
 +
| XspiMOSI0
 +
| '''8'''
 +
| XspiMISO0
 +
|-
 +
| '''9'''
 +
| XspiCLK0
 +
| '''10'''
 +
| XspiCS0
 +
|-
 +
| '''11'''
 +
| WiFi0_PD_GPIO
 +
| '''12'''
 +
| WiFi0_RESET_GPIO
 +
|-
 +
| '''13'''
 +
| XmmcCLK2
 +
| '''14'''
 +
| XmmcCMD2
 +
|-
 +
| '''15'''
 +
| XmmcCDn2
 +
| '''16'''
 +
| WIFI1_nWP
 +
|-
 +
| '''17'''
 +
| Xmmc2DATA0
 +
| '''18'''
 +
| Xmmc2DATA1
 +
|-
 +
| '''19'''
 +
| Xmmc2DATA2
 +
| '''20'''
 +
| Xmmc2DATA3
 +
|-
 +
|}
 +
 
 +
===CON10 (Camera A)===
 +
{| class="wikitable"
 +
|-
 +
! Row 1 Pin
 +
! Description
 +
! Row 2 Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| Xi2cSDA0
 +
| '''2'''
 +
| Xi2cSCL0
 +
|-
 +
| '''3'''
 +
| XciFIELD/CAMERA_A_GPIO2
 +
| '''4'''
 +
| CAMERA_A_RESET
 +
|-
 +
| '''5'''
 +
| XciCLKenb
 +
| '''6'''
 +
| XciHREF
 +
|-
 +
| '''7'''
 +
| XciVSYNC
 +
| '''8'''
 +
| XciPCLK
 +
|-
 +
| '''9'''
 +
| XciYDATA7
 +
| '''10'''
 +
| XciYDATA6
 +
|-
 +
| '''11'''
 +
| XciYDATA5
 +
| '''12'''
 +
| XciYDATA4
 +
|-
 +
| '''13'''
 +
| XciYDATA3
 +
| '''14'''
 +
| XciYDATA2
 +
|-
 +
| '''15'''
 +
| XciYDATA1
 +
| '''16'''
 +
| XciYDATA0
 +
|-
 +
| '''17'''
 +
| VDD_SYS_3.3V
 +
| '''18'''
 +
| VDD_CAMA_2.8V
 +
|-
 +
| '''19'''
 +
| VDD_CAMA_1.8V
 +
| '''20'''
 +
| DGND
 +
|-
 +
|}
 +
 
 +
 
 +
===CON12 (Keypad 8X8 Interface)===
 +
 
 +
'''Linux Device:''' /dev/buttons
 +
 
 +
'''WinCE 6 Driver:''' KEY
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Row 1 Pin
 +
! Description
 +
! Row 2 Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| XEINT16/KP_COL0
 +
Button K1/GPH2_0
 +
| '''2'''
 +
| XEINT24/KP_ROW0
 +
GPH3_0
 +
|-
 +
| '''3'''
 +
| XEINT17/KP_COL1
 +
Button K2/GPH2_1
 +
| '''4'''
 +
| XEINT25/KP_ROW1
 +
GPH3_1
 +
|-
 +
| '''5'''
 +
| XEINT18/KP_COL2
 +
Button K3/GPH2_2
 +
| '''6'''
 +
| XEINT26/KP_ROW2
 +
GPH3_2
 +
|-
 +
| '''7'''
 +
| XEINT19/KP_COL3
 +
Button K4/GPH2_0
 +
| '''8'''
 +
| XEINT27/KP_ROW3
 +
GPH3_3
 +
|-
 +
| '''9'''
 +
| XEINT20/KP_COL4
 +
GPH2_4
 +
| '''10'''
 +
| XEINT28/KP_ROW4
 +
GPH3_4
 +
|-
 +
| '''11'''
 +
| XEINT21/KP_COL5
 +
GPH2_5
 +
| '''12'''
 +
| XEINT29/KP_ROW5
 +
GPH3_5
 +
|-
 +
| '''13'''
 +
| XEINT22/KP_COL6
 +
GPH2_6
 +
| '''14'''
 +
| XEINT30/KP_ROW6
 +
GPH3_6
 +
|-
 +
| '''15'''
 +
| XEINT23/KP_COL7
 +
GPH2_7
 +
| '''16'''
 +
| XEINT31/KP_ROW7
 +
GPH3_7
 +
|-
 +
| '''17'''
 +
| VDD_SYS_3.3V
 +
| '''18'''
 +
| VDD_SYS_3.3V
 +
|-
 +
| '''19'''
 +
| DGND
 +
| '''20'''
 +
| DGND
 +
|-
 +
|}
 +
 
 +
===CON16 (MIPI)===
 +
{| class="wikitable"
 +
|-
 +
! Row 1 Pin
 +
! Description
 +
! Row 2 Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| VDD_SYS_3.3V
 +
| '''2'''
 +
| DGND
 +
|-
 +
| '''3'''
 +
| VDD_5V
 +
| '''4'''
 +
| DGND
 +
|-
 +
| '''5'''
 +
| XmipiSDPCLK
 +
| '''6'''
 +
| XmipiMDPCLK
 +
|-
 +
| '''7'''
 +
| XmipiSDNCLK
 +
| '''8'''
 +
| XmipiMDNCLK
 +
|-
 +
| '''9'''
 +
| XmipiSDP0
 +
| '''10'''
 +
| XmipiMDP0
 +
|-
 +
| '''11'''
 +
| XmipiSDN0
 +
| '''12'''
 +
| XmipiMDN0
 +
|-
 +
| '''13'''
 +
| XmipiSDP1
 +
| '''14'''
 +
| XmipiMDP1
 +
|-
 +
| '''15'''
 +
| XmipiSDN1
 +
| '''16'''
 +
| XmipiMDN1
 +
|-
 +
| '''17'''
 +
| XmipiSDP2
 +
| '''18'''
 +
| XmipiMDP2
 +
|-
 +
| '''19'''
 +
| XmipiSDN2
 +
| '''20'''
 +
| XmipiMDN2
 +
|-
 +
| '''21'''
 +
| XmipiSDP3
 +
| '''22'''
 +
| XmipiMDP3
 +
|-
 +
| '''23'''
 +
| XmipiSDN3
 +
| '''24'''
 +
| XmipiMDN3
 +
|-
 +
|}
 +
 
 +
===JTAG===
 +
{| class="wikitable"
 +
|-
 +
! Row 1 Pin
 +
! Description
 +
! Row 2 Pin
 +
! Description
 +
|-
 +
| '''1'''
 +
| VDD_SYS_3.3V
 +
| '''2'''
 +
| VDD_SYS_3.3V
 +
|-
 +
| '''3'''
 +
| XjTRSTn
 +
| '''4'''
 +
| XnRESET
 +
|-
 +
| '''5'''
 +
| XjTDI
 +
| '''6'''
 +
| XjTDO
 +
|-
 +
| '''7'''
 +
| XjTMS
 +
| '''8'''
 +
| DGND
 +
|-
 +
| '''9'''
 +
| XjTCK
 +
| '''10'''
 +
| DGND
 +
|-
 +
|}
  
 
==Debian on SD==
 
==Debian on SD==
  
==机械尺寸==
+
==Linux==
==快速入门==
+
Preparing an SD card to install Linux to Flash using Windows.
 +
 
 +
You will need these files from the DVD or download them here: Mini210S Linux.
 +
Superboot.bin 
 +
 
 +
Install the SD-Flasher tool from the DVD or get it here. SD_Flasher Download.
 +
 
 +
 
 +
Format the SD in your computer. Use FAT32 formatting.
 +
Run-as-administrator the SD-Flasher tool and select Mini210S form the drop down menu.
 +
 
 +
==Real-Time==

Latest revision as of 04:41, 30 June 2017

Overview

Mini210s Board Layout

System

  • CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine (smooth 2D/3D, up to 1080p @ 30 fps decoding and encoding)
  • RAM: 512 MB DDR2 RAM, 32-bit bus
  • Flash: 1GB SLC NAND Flash
  • EEPROM: 256 Byte (I2C)
  • Ext. Memory: MicroSD card slot, Custom SDIO adapters.
  • RTC: Real-Time Clock with battery

Video & Audio

  • LCD Interface: 41-pin (1.0 mm) connector for FriendlyARM Displays, resistive and capacitive.
  • Monitor: Mini-HDMI (type C)
  • Camera: 20-pin (2.0 mm) CMOS Camera interface
  • Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)
  • Audio Input: Condenser microphone on board

Network

  • Ethernet: RJ45 10/100M (DM9000)

Other IO

  • Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
  • USB: 1x USB-A Host 2.0, 1x Mini-USB Slave/OTG 2.0
  • Beeper: PWM buzzer
  • User Inputs: 4x push buttons and 1x ADC pot
  • User Output LEDs: 4x
  • Mobile Industry Processor Interface (MIPI): 24-pin (2.0 mm) header
  • SDIO Interface: 20-pin (2.0 mm) header, supports SD WiFi module, contains 1x SPI and 2x I2C
  • 8×8 Keypad Interface: 20-pin (2.0 mm) header
  • GPIO Interface: 10-pin (2.0 mm) header, contains ADC, I2C, I2C, SPI, PWM, IO...
  • Debug: 10-pin JTAG (2.0 mm)

Mechanical

  • Dimensions: 110 × 110 mm
  • Temperature: 0°C to 70°C
  • Power: Regulated 5V (DC-Plug)
  • Weight: 98g

Hardware configuration:

  • CPU processor - SOC (System On Chip)
  • Samsung S5PV210, based on the ARM Cortex ™-A8, running at 1GHz
  • High-performance graphics engine built-in. PowerVR SGX540
  • 2D/3D graphics acceleration for supper smooth real-time graphics.
  • Supports up to 1080p @ 30fps hardware decoding and smooth video playback, using MPEG4, H.263, H.264.
  • Supports up to 1080p @ 30fps hardware encoding (Mpeg-2/VC1,) video input.

RAM

  • Size: 512MB DDR2
  • Full width 32 bit data bus, single-channel

FLASH memory

  • SLC NAND Flash: 1GB (Standard)
  • Supports SLC NAND Flash: 256M/512M/1GB (OEM optional)

LCD display

  • LCD: 41Pin, 1.0mm pitch, same as Mini2440/Mini6410 displays.
  • Touch pad support with one I2C and 3-way interrupts, 1 PWM output
  • MiniHDMI HD connector (Type C)
  • The LCD controller supports from 3.5 inches to 12.1 inches with screen resolution up to 1024x768.

Network (including wireless)

  • 10/100M Ethernet RJ45 interface (using DM9000AEP)

Standard interface resources

  • DB9 serial RS232 five lines (shares four pin TTL level serial COM 0)
  • Mini USB 2.0 Slave OTG interface
  • USB through the 2.0mm interface header
  • 1 channel 3.5mm stereo audio output interface
  • On board microphone
  • External speaker interface (direct drive 8Ω 1W speaker)
  • USB Host 2.0 interface
  • Standard MicroSD card socket
  • 5V DC voltage input

On-board resources

  • I2C-EEPROM chip (256byte), mainly used to test the I2C bus
  • 4 LED (green)
  • 4 Push buton switches
  • One Pot on ADC conversion input 0 for test.
  • 1 PWM buzzer.
  • On board battery backed real-time clock.

External expansion interface resources

  • 4 serial connectors: TTL level, 2.0mm spacing;
    • CON1, CON2 six-wire serial port - includes 5V and Gnd.
    • CON3, CON4 four-wire serial port - includes 5V and Gnd
  • JTAG interface: 10pin 2.0mm pitch
  • LCD interface: 41pin 1.0mm pitch Chip Block
  • MIPI interface: 24pin 2.0mm pitch pin header
  • SDIO interface: 20pin 2.0mm pitch
    • Access for SD WiFi, SDIO includes SPI and I2C interfaces
  • CMOS camera interface: 20pin 2.0mm pitch.
  • 8x8 matrix keyboard interface: 20pin 2.0mm pitch
  • GPIO interface: 30pin, 2.0mm pitch
    • Additional AD input, interrupts, I2S, I2C, SPI PWM port, digital input/output

Software Support

  • Superboot
  • Linux-2.6.35 + Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
  • Android 2.3 (Linux-2.6.35 kernel)
  • Android 4.0 (Linux-3.0 kernel, only to provide the programming file)
  • WindowsCE 6.0r3

Board I/O

Board connector pin outs and information for the Mini210s board, Smart and Tiny SDK board will vary.

CON1 (UART)

Linux Device: /dev/ttySAC0

WinCE 6: COM0

Notes: Is also connected to RS232 DB9 connector.

Pin Description
1 RTS
2 CTS
3 TX
4 RX
5 VDD_5V
6 DGND


CON2 (UART)

Linux Device: /dev/ttySAC1

WinCE 6: COM1

Pin Description
1 RTS
2 CTS
3 TX
4 RX
5 VDD_5V
6 DGND


CON3 (UART)

Linux Device: /dev/ttySAC2

WinCE 6: COM2

Pin Description
1 TX
2 RX
3 VDD_5V
4 DGND


CON4 (UART)

Linux Device: /dev/ttySAC3

WinCE 6: COM3

Pin Description
1 TX
2 RX
3 VDD_5V
4 DGND


CON6 (GPIO)

Row 1 Pin Description Row 2 Pin Description
1 VDD_SYS_3.3V 2 DGND
3 XadcAIN1 4 XEINT0/GPH0_0
5 XadcAIN2 6 XEINT1/GPH0_1
7 XadcAIN6 8 XEINT2/GPH0_2
9 XadcAIN7 10 XEINT3/GPH0_3
11 XadcAIN8 12 XEINT4/GPH0_4
13 XadcAIN9 14 XEINT5/GPH0_5
15 Xi2cSDA0 16 XEINT6/GPH0_6
17 Xi2cSCL0 18 XEINT9/GPH1_1
19 Xi2cSDA1 20 XspiCLK1
21 Xi2cSCL1 22 PDXspiCS1
23 Xi2cSDA2 24 XspiMISO1
25 Xi2cSCL2 26 XspiMOSI1
27 XnRSTOUT 28 XpwmTOUT2
29 XPWRRGTON 30 XpwmTOUT3

CON9 (SD WIFI)

Row 1 Pin Description Row 2 Pin Description
1 VDD_SYS_3.3V 2 DGND
3 NC 4 NC
5 Xi2cSCL0 6 Xi2cSDA0
7 XspiMOSI0 8 XspiMISO0
9 XspiCLK0 10 XspiCS0
11 WiFi0_PD_GPIO 12 WiFi0_RESET_GPIO
13 XmmcCLK2 14 XmmcCMD2
15 XmmcCDn2 16 WIFI1_nWP
17 Xmmc2DATA0 18 Xmmc2DATA1
19 Xmmc2DATA2 20 Xmmc2DATA3

CON10 (Camera A)

Row 1 Pin Description Row 2 Pin Description
1 Xi2cSDA0 2 Xi2cSCL0
3 XciFIELD/CAMERA_A_GPIO2 4 CAMERA_A_RESET
5 XciCLKenb 6 XciHREF
7 XciVSYNC 8 XciPCLK
9 XciYDATA7 10 XciYDATA6
11 XciYDATA5 12 XciYDATA4
13 XciYDATA3 14 XciYDATA2
15 XciYDATA1 16 XciYDATA0
17 VDD_SYS_3.3V 18 VDD_CAMA_2.8V
19 VDD_CAMA_1.8V 20 DGND


CON12 (Keypad 8X8 Interface)

Linux Device: /dev/buttons

WinCE 6 Driver: KEY

Row 1 Pin Description Row 2 Pin Description
1 XEINT16/KP_COL0

Button K1/GPH2_0

2 XEINT24/KP_ROW0

GPH3_0

3 XEINT17/KP_COL1

Button K2/GPH2_1

4 XEINT25/KP_ROW1

GPH3_1

5 XEINT18/KP_COL2

Button K3/GPH2_2

6 XEINT26/KP_ROW2

GPH3_2

7 XEINT19/KP_COL3

Button K4/GPH2_0

8 XEINT27/KP_ROW3

GPH3_3

9 XEINT20/KP_COL4

GPH2_4

10 XEINT28/KP_ROW4

GPH3_4

11 XEINT21/KP_COL5

GPH2_5

12 XEINT29/KP_ROW5

GPH3_5

13 XEINT22/KP_COL6

GPH2_6

14 XEINT30/KP_ROW6

GPH3_6

15 XEINT23/KP_COL7

GPH2_7

16 XEINT31/KP_ROW7

GPH3_7

17 VDD_SYS_3.3V 18 VDD_SYS_3.3V
19 DGND 20 DGND

CON16 (MIPI)

Row 1 Pin Description Row 2 Pin Description
1 VDD_SYS_3.3V 2 DGND
3 VDD_5V 4 DGND
5 XmipiSDPCLK 6 XmipiMDPCLK
7 XmipiSDNCLK 8 XmipiMDNCLK
9 XmipiSDP0 10 XmipiMDP0
11 XmipiSDN0 12 XmipiMDN0
13 XmipiSDP1 14 XmipiMDP1
15 XmipiSDN1 16 XmipiMDN1
17 XmipiSDP2 18 XmipiMDP2
19 XmipiSDN2 20 XmipiMDN2
21 XmipiSDP3 22 XmipiMDP3
23 XmipiSDN3 24 XmipiMDN3

JTAG

Row 1 Pin Description Row 2 Pin Description
1 VDD_SYS_3.3V 2 VDD_SYS_3.3V
3 XjTRSTn 4 XnRESET
5 XjTDI 6 XjTDO
7 XjTMS 8 DGND
9 XjTCK 10 DGND

Debian on SD

Linux

Preparing an SD card to install Linux to Flash using Windows.

You will need these files from the DVD or download them here: Mini210S Linux. Superboot.bin

Install the SD-Flasher tool from the DVD or get it here. SD_Flasher Download.


Format the SD in your computer. Use FAT32 formatting. Run-as-administrator the SD-Flasher tool and select Mini210S form the drop down menu.

Real-Time