Mini210S

From ARMWorks
Revision as of 18:57, 28 June 2017 by Jrspruitt (talk | contribs) (On Board I/O: Added CON12 table)

Jump to: navigation, search

Overview

Mini210s Board Layout

System

  • CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine (smooth 2D/3D, up to 1080p @ 30 fps decoding and encoding)
  • RAM: 512 MB DDR2 RAM, 32-bit bus
  • Flash: 1GB SLC NAND Flash
  • EEPROM: 256 Byte (I2C)
  • Ext. Memory: MicroSD card slot, Custom SDIO adapters.
  • RTC: Real-Time Clock with battery

Video & Audio

  • LCD Interface: 41-pin (1.0 mm) connector for FriendlyARM Displays, resistive and capacitive.
  • Monitor: Mini-HDMI (type C)
  • Camera: 20-pin (2.0 mm) CMOS Camera interface
  • Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)
  • Audio Input: Condenser microphone on board

Network

  • Ethernet: RJ45 10/100M (DM9000)

Other IO

  • Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
  • USB: 1x USB-A Host 2.0, 1x Mini-USB Slave/OTG 2.0
  • Beeper: PWM buzzer
  • User Inputs: 4x push buttons and 1x ADC pot
  • User Output LEDs: 4x
  • Mobile Industry Processor Interface (MIPI): 24-pin (2.0 mm) header
  • SDIO Interface: 20-pin (2.0 mm) header, supports SD WiFi module, contains 1x SPI and 2x I2C
  • 8×8 Keypad Interface: 20-pin (2.0 mm) header
  • GPIO Interface: 10-pin (2.0 mm) header, contains ADC, I2C, I2C, SPI, PWM, IO...
  • Debug: 10-pin JTAG (2.0 mm)

Mechanical

  • Dimensions: 110 × 110 mm
  • Temperature: 0°C to 70°C
  • Power: Regulated 5V (DC-Plug)
  • Weight: 98g

Hardware configuration:

  • CPU processor - SOC (System On Chip)
  • Samsung S5PV210, based on the ARM Cortex ™-A8, running at 1GHz
  • High-performance graphics engine built-in. PowerVR SGX540
  • 2D/3D graphics acceleration for supper smooth real-time graphics.
  • Supports up to 1080p @ 30fps hardware decoding and smooth video playback, using MPEG4, H.263, H.264.
  • Supports up to 1080p @ 30fps hardware encoding (Mpeg-2/VC1,) video input.

RAM

  • Size: 512MB DDR2
  • Full width 32 bit data bus, single-channel

FLASH memory

  • SLC NAND Flash: 1GB (Standard)
  • Supports SLC NAND Flash: 256M/512M/1GB (OEM optional)

LCD display

  • LCD: 41Pin, 1.0mm pitch, same as Mini2440/Mini6410 displays.
  • Touch pad support with one I2C and 3-way interrupts, 1 PWM output
  • MiniHDMI HD connector (Type C)
  • The LCD controller supports from 3.5 inches to 12.1 inches with screen resolution up to 1024x768.

Network (including wireless)

  • 10/100M Ethernet RJ45 interface (using DM9000AEP)

Standard interface resources

  • DB9 serial RS232 five lines (shares four pin TTL level serial COM 0)
  • Mini USB 2.0 Slave OTG interface
  • USB through the 2.0mm interface header
  • 1 channel 3.5mm stereo audio output interface
  • On board microphone
  • External speaker interface (direct drive 8Ω 1W speaker)
  • USB Host 2.0 interface
  • Standard MicroSD card socket
  • 5V DC voltage input

On-board resources

  • I2C-EEPROM chip (256byte), mainly used to test the I2C bus
  • 4 LED (green)
  • 4 Push buton switches
  • One Pot on ADC conversion input 0 for test.
  • 1 PWM buzzer.
  • On board battery backed real-time clock.

External expansion interface resources

  • 4 serial connectors: TTL level, 2.0mm spacing;
    • CON1, CON2 six-wire serial port - includes 5V and Gnd.
    • CON3, CON4 four-wire serial port - includes 5V and Gnd
  • JTAG interface: 10pin 2.0mm pitch
  • LCD interface: 41pin 1.0mm pitch Chip Block
  • MIPI interface: 24pin 2.0mm pitch pin header
  • SDIO interface: 20pin 2.0mm pitch
    • Access for SD WiFi, SDIO includes SPI and I2C interfaces
  • CMOS camera interface: 20pin 2.0mm pitch.
  • 8x8 matrix keyboard interface: 20pin 2.0mm pitch
  • GPIO interface: 30pin, 2.0mm pitch
    • Additional AD input, interrupts, I2S, I2C, SPI PWM port, digital input/output

Software Support

  • Superboot
  • Linux-2.6.35 + Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
  • Android 2.3 (Linux-2.6.35 kernel)
  • Android 4.0 (Linux-3.0 kernel, only to provide the programming file)
  • WindowsCE 6.0r3

On Board I/O

Show all connectors and signals.

CON12 (Keypad X 16 Interface)

Row 1 Pin Description Row 2 Pin Description
1 XEINT16/KP_COL0 2 XEINT24/KP_ROW0
3 XEINT17/KP_COL1 4 XEINT25/KP_ROW1
5 XEINT18/KP_COL2 6 XEINT26/KP_ROW2
7 XEINT19/KP_COL3 8 XEINT27/KP_ROW3
9 XEINT20/KP_COL4 10 XEINT28/KP_ROW4
11 XEINT21/KP_COL5 12 XEINT29/KP_ROW5
13 XEINT22/KP_COL6 14 XEINT30/KP_ROW6
15 XEINT23/KP_COL7 16 XEINT31/KP_ROW7
17 VDD_SYS_3.3V 18 VDD_SYS_3.3V
19 DGND 20 DGND

Debian on SD

Linux

Preparing an SD card to install Linux to Flash using Windows.

You will need these files from the DVD or download them here: Mini210S Linux. Superboot.bin

Install the SD-Flasher tool from the DVD or get it here. SD_Flasher Download.


Format the SD in your computer. Use FAT32 formatting. Run-as-administrator the SD-Flasher tool and select Mini210S form the drop down menu.

Real-Time